SPECIFICATIONS

Brand Name: NoEnName_Null

Model Number: /

Origin: Mainland China

Hign-concerned Chemical: none

Condition: New

Type: /

Supply Voltage: /

Dissipation Power: /

is_customized: Yes

Operating Temperature: /

Application: /

Package: DIP

Choice: yes

semi_Choice: yes

DIY Electronic Kit Small Airplane CD4017 Flow Lamp Welding Practice Electronic Science Assembly Kit Flashing LED PCB

1. Introduction:

It is an airplane flashing LED circuit DIY kit. It can simulate the flashing effect of airplane lights and DIY to create a very artistic desktop decoration. Not only can it be used as a DIY electronic soldering kit, allowing you to better understand circuits and learn how to solder, it can also be used as a very suitable experimental workbench tool.

2. Features:

1>.Simulating aircraft design

2>.Interesting DIY hand welding

3>.Simple and easy to operate

3. Parameters:

1>.LED color: red/green/yellow

2>.Battery type: CR1220

3>. Working temperature: -20℃~85℃

4>.Working humidity: 0%~95%RH

5>. Size (after installation): 110*105*33mm

4.Component list:

1>There is a DIP-16 CD4017BE decimal counter at U2.

2>.1 DIP-8 NE555P timer in U1.

3>.1 DIP-16 IC socket is located at U2.

4>.1 DIP-8 IC socket is located at U1.

5>.1pcs 1Kohm metal film resistor R3.

6>.1pcs 5.1Kohm metal film resistor R2.

7>.1pcs 10Kohm metal film resistor R1.

8>.Three 3mm red LEDs are located at LED1, LED4 and LED7.

9> There are two 3mm green LEDs at LED2 and LED3.

10>.2 3mm yellow LEDs are located at LED5 and LED6.

11>.1x 0.01uF 103 ceramic capacitor at C2.

12>A 10uF electrolytic capacitor at C1.

13>.1 SW power switch.

14>.1 CR1220 lithium battery is at BT1 and BT2.

15>. One CR1220 lithium battery socket is located at BT1 and BT2.

16>.2 PCB circuit boards

5.Application:

1>.Welding skills training

2>.Student school

3>.DIY production

4>.Project design

5>.E-sports

6>.Gift giving

7>.Craft collection

8>.Home decoration

9>.Souvenir collection

10>.Graduation project

11>.Holiday gifts

6. Installation tips:

1>.Users need to prepare welding tools first.

2>.Please wait patiently for the installation to complete.

3>. This kit is a DIY kit and needs to be installed by the user.

4>. The soldering iron cannot contact the component for a long time (1.0 seconds), otherwise the component will be damaged.

5>. Pay attention to the positive and negative poles of the components.

6>.Short circuit is strictly prohibited.

7>. Prioritize installation of complex components.

8>. Make sure all parts are in the correct direction and correct position.

9>. Please wear anti-static gloves or anti-static wrist strap when installing electronic components.

10>. It is strongly recommended to read the installation manual before starting the installation! ! !